KL2702 | 2-channel solid state load relay up to 230 V AC/DC

The KL2702 output terminal uses an electronic load relay to switch a mains voltage of up to 230 V AC/DC. The switching element is a high-power MOSFET, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The KL2702 terminal has two independent outputs. Its signal state is indicated by means of light emitting diodes.

Technical data	KL2702 | KS2702	KL2702-0020	KL2702-0002
Connection technology	2-/3-/4-wire
Number of outputs	2 x make contacts
Rated load voltage	0…230 V AC/DC
Load type	ohmic, inductive
Max. output current	0.3 A steady load on each channel	1.5 A steady load on each channel	2 A steady load on each channel
Frequency range	DC > 100 Hz
Surge voltage protection	> 400 V AC
Peak current	0.5 A (20 s), 1.5 A (100 ms)	2.5 A (20 s), 7.5 A (100 ms)	2.5 A (20 s), 7.5 A (100 ms)
Recommended fuse	≤ 2 A fast fuse, 1 A slow fuse	characteristic B6	characteristic B6
Contact resistance	2.1 Ω typ., 3.2 Ω max.	0.3 Ω typ., 0.4 Ω max.	0.3 Ω typ., 0.4 Ω max.
Switch-on time	4…6 ms	0.2…0.4 ms	0.2…0.4 ms
Switch-off time	0.05…0.1 ms	5…8 ms	5…8 ms
Switch-on delay	320 µs
Switch-off delay	6.2 ms
Electrical isolation	500 V (K-bus/field voltage), 2,500 V AC (1 min.)
Leakage current	<< 1 mA (OFF state)
Current consumption power contacts	only leakage and load current
Current consumpt. K-bus	typ. 10 mA	typ. 50 mA	typ. 50 mA
Bit width in the process image	2 outputs
Configuration	no address or configuration setting
Special features	–	–
Weight	approx. 55 g
Operating/storage temperature	0…+55 °C/-25…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable
Pluggable wiring	for all KSxxxx Bus Terminals	–	–
Approvals	CE, UL, Ex, GL	CE	CE