FC5151
FC5151 | Mini PCI CANopen
The FC5151 Mini PCI Card brings fieldbus functionalities to the Industrial PC in a compact construction. The bus interface is not implemented on the fieldbus card, but separately in the respective housing (device-specific). The FC5151 is available for Beckhoff Industrial PCs with Mini PCI option. Like the standard PCI cards, the Mini PCI variants are specifically optimised for fast controllers and real-time tasks:
- connection of the PC to a CANopen network (optionally network master or slave)
- powerful parameter and diagnostics interfaces
- The error management for each bus user is freely configurable.
- switchable termination resistor
The power of the Fieldbus Cards can be most easily seen in combination with the TwinCAT software PLC and NC. But other applications also benefit from the intelligent PCI cards that handle the fieldbus protocol efficiently on their own processors. The Fieldbus Cards are optionally available with 128 kbyte NOVRAM.
| Technical data | FC5151 |
|---|---|
| Fieldbus | CANopen |
| Number of fieldbus channels | 1 |
| Data transfer rates | 10, 20, 50, 100, 125, 250, 500, 800, 1,000 kbaud |
| Interface to the PC | Mini PCI interface, 32 bit with 4 kbyte DPRAM per channel |
| Communication | CANopen network master and CANopen manager, optionally CANopen slave |
| Bus device | max. 127 slaves |
| Termination resistor | switchable |
| Dimensions | 59.75 mm x 50.95 mm (type III A) |
| Operating temperature | 0…+55 °C |
| Driver | TwinCAT I/O and higher levels |
 |
|
| Ordering information | FC5151-000x |
|---|---|
| FC5151-0000 | standard configuration (can only be ordered with a Beckhoff Industrial PC with Mini PCI option) |
| FC5151-0002 | configuration with 128 kbytes NOVRAM (can only be ordered with a Beckhoff Industrial PC with Mini PCI option) |
|
|
| Accessories | |
|---|---|
| TwinCAT I/O | I/O driver |
|
|
| System |
|
|---|---|
| CANopen | For further CANopen products please see the system overview. |
|
|